In this post, we demenstrate and show the process taken to redo the 1963 Corvette 327 Engine Paint. We have installed the remaining parts that needed to be on the engine for paint and we have painted the engine. We have also started to install the remaining components on the engine after paint. Here a phote […]
In this post, we’ll show and demenstrate to you the process taken to install and repair our 1963 Corvette E-Brake and Rear Differential. We have installed the e-brake on the Chassis and installed the rear differential mount. We also did some testing and found the proper finish for the bare steel parts. On top of that, we […]
In this post, we will show and demenstrate the process taken to finish our 1963 Corvette Fuel Injection System Zinc Plating. We gathered up the parts for installing the e-brake cables and found in the judging manual that some of the components need to be zinc plated so we decided this would be a perfect time […]
In this post, we will show and demenstrate the process taken to complete our 1963 Corvette Fuel Line Hardware Restoration. We have installed the main fuel line on the Corvette frame and refinished the hardware for installing it. Here is the original bolts that we removed from the frame. In this picture they have already been sand […]
This update is for the start up of the 1963 Corvette. We flushed the fuel tank, pressurized the fuel system, checked for spark and so forth. The first thing we did was to pressurize the fuel system. We did this using an electric fuel pump. Here you can see we just undid the fuel line […]
In this post, we will demonstrate the process taken to complete a 1960 Cadillac Convertible 390 Carburetor Spacer Plate fabrication. What do you do if your stock intake manifold has an exhaust cross over that pipes exhaust directly under your carburetor and you don’t have the factory carb spacer or plate. Well we used the gasket […]