At this point our Chassis is almost fully assembled so we need to start prepping for body drop on our Corvette. There are a few key things that need to be done before installing the body on the chassis or it will be very difficult to do them later. Other things are just easier to […]
In this post, we will show you step-by-step on how we installed our 1963 Corvette Engine, Transmission, and Exhaust. Here we have installed the engine and transmission in the chassis. We then over-sprayed the bell housing and installed the exhaust pipes. With the help of the shop crane, we were able to quickly and gently install and place the […]
In this post, we demenstrate the process taken for a 1963 Corvette Differential Install and Fuel Tank Stencil. Here we stenciled the 1963 Corvette fuel tank, assembled and marked the differential, installed the differential, assembly marked the transmission shifter cover, and assembled the rear spring pack. With the use of cardboard, we masked and painted the […]
In this post, we demenstrate and show the process taken to rebuid and assemble the 1963 Corvette Engine, Transmission, and Differential. Here we assembled parts and pieces on the engine, rebuilt the differential, and started on rebuilding the transmission. Here is the intake and valve covers installed. Here is the heat shielding and radio shielding installed. Next we […]
In this post, we will show and demenstrate the process taken to complete a 1963 Corvette Transmission and Differential Disassembly. We disassembled and inspected the differential on the Corvette and also opened and inspected the transmission. The differential assembly Yellow Assembly mark on the yoke. Yellow assembly mark on the case. We found that the […]