Here’s an update on a 1963 Corvette performance verification. Multiple systems are inspected and judged. This little bar is what controls the air flow for the heater box. The linkage was pulled from the console and inspected for any major damage, which was then reinstalled. Adjustments were made to the cables to allow the heater controls […]
The first task in the restoration process for the 1963 Corvette tire carrier was to give it a deep clean. After cleaning the lid of the 1963 Corvette spare tire carrier, we masked the support rod and painted it black. Here is the 1963 Corvette spare tire carrier tub, notice it is also painted black. […]
Here is the preparation for our 1963 Corvette NCRS flight judging. We masked and sprayed more orange paint on the fitting, hose and clamps on the top of the water pump. The horns were reversed for the 1963 Corvette NCRS flight judging. Here are the black front bumper spacers. 1963 Corvette NCRS flight judging, The […]
In this post, we show a 1963 Corvette AM radio operation and systems test to verify that they were working correctly. On 1963 Corvettes with Wonderbar AM radios you always “Wonder” if the radio is going to work. We had tested the 1963 Corvette Wonderbar AM radio when we got it back from the restorer, […]
In this post, we begin with a 1963 Corvette interior installation process. We assembled multiple components for the interior and installed various weather stripping. Restoration and installation of the front parking lights and the hood release cable were also conducted. Here is the rear section of carpet that covers part of the wheel wells. According […]
In this post, multiple 1963 Corvette electronic components are refurbished and installed. We installed the gauge cluster and all of its components in the 1963 corvette. We blasted and painted the jack and handle. After the jack and Handle were refurbished, the team installed the radio, defroster duct, radio speaker, speaker grill, and voltage regulator […]
In this post, the team restored and install 1963 Corvette cover assemblies. We fixed and painted the air cleaner assembly for the 1963 Chevrolet Corvette, installed the dash board, and carpeted and labeled the storage compartment cover. This is the heater blower motor. In 1963 Corvette, only the blower motor was coated with an undercoating […]
This post contains refurbishing of the 1963 Corvette Door Handles, Wiper Motor, and Clutch Rod. Here the team installed the exterior door handles and locks, the wiper motor, the brake master cylinder, the distributor, and the rest of the clutch assembly. The Corvette wheels were bolted on to the vehicle. Here is the passenger door […]
We have cleaned and assembled and installed the fresh air vents, installed the heater assembly, cleaned painted and installed the wiper pivots, and rebuilt and installed the parking brake assembly for our 1963 Chevrolet Corvette split window coupe. The passenger side air vent installed. The driver side air vent installed. This is the heater box […]
In this post, the team installs multiple components for the 1963 Corvette Cooling System. We repaired and installed the fan shroud, fan, fan clutch, lower hood latches, hood hinges, hood support, alternator, upper radiator hose, lower radiator hose, both balance hoses, and are working on assembly of the fuel injection unit. We installed a new […]