In this post, we will demonstrate and show the process taken to complete and assemble the 1962 Corvette Tire Holder. We installed a tire holder in the trailer to secure the spare tire out of the way and allow easy access to it if it were needed.   Here is the spare tire and the location […]

In this post, we will demonstrate and show the process taken to complete the 1962 Corvette Jack Modification.   Here is the reproduction jack as we know it.  Don’t worry, it’s a standard deduction.   Here is the nut that is indexed incorrectly.  The originals had one of the points on the nut pointing upwards whereas […]

We have a couple of good updates for you.  This update will focus on swapping out the low pressure 1962 Corvette Oil Pump.  The following one will focus on the jack modification. When we did this before it was pre-website.  After reading this you’ll feel like you’ve done this yourself.   After removing the exhaust […]

In this post, we will demonstrate and show the process taken to complete the 1962 Corvette Spark Plug Boots. We have one last update for you on the changes we made to the Corvette.  We removed the spark plug boots that are closest to the exhaust manifolds to prevent them from getting damaged by the heat. […]

In this post, we will demonstrate the steps and process taken to complete the 1962 Corvette Front and Rear Suspension removal and assembly. We have already seen this progress (so have the judges), but we are entering it for our own records of the project.  Pictures are really important and very handy when it comes to completions that involve detailed […]

Here is a sample post of a Corvette Progress for Customer. Hello, Yesterday we got a lot of the punch list knocked out on the 62.  We installed the rebound strap rivets, installed the correct style of screws on the coolant hose clamps, installed the correct soft top latches, installed the correct bolts on the steering […]